Gas Services
Gas Line Installation in Trenton & Quinte West
Gas line work in Ontario must be performed by a TSSA certified gas technician. Johnston Mechanical HVAC LTD installs and extends gas lines for appliances, BBQs, fireplaces, generators, and new construction across Trenton, Quinte West, Belleville, Brighton, and surrounding communities. Brandon Johnston holds TSSA certification FS-R-52252 and personally oversees every gas line job.
Whether you are adding a gas range, connecting a BBQ on the deck, running a line to a new fireplace, or roughing in gas for a new home in Quinte West, the work must be done by a licensed gas technician and pressure-tested before any appliance is connected. Brandon handles the full scope — from sizing the line to the final pressure test and connection.
Gas line sizing is not guesswork. The line must be sized to deliver adequate pressure and flow to every appliance connected to it, accounting for the total BTU demand and the length of the run. An undersized gas line causes appliances to underperform, leads to pressure drops during peak demand, and can cause nuisance shutdowns on high-efficiency equipment like Navien tankless water heaters and condensing furnaces.
For new construction in Trenton, Quinte West, and Brighton, Johnston Mechanical handles the full gas rough-in — meter connection, main trunk, and branch lines to each appliance location. Brandon coordinates with the builder to ensure the rough-in is completed at the right stage and that all lines are properly supported, protected, and accessible for future service.
For existing homes, Brandon can extend your current gas system to reach a new appliance location, add a dedicated line for a BBQ or outdoor kitchen, or run a line to a garage or workshop. He assesses your existing meter capacity and main line size before any work begins to confirm the system can handle the additional load.
All gas line work by Johnston Mechanical is pressure-tested before any appliance is connected. Brandon uses a calibrated gauge to hold the line at test pressure and confirms there are no leaks before signing off on the installation. This is not optional — it is the standard that protects your family and your home.
Gas line work is one area where hiring an uncertified contractor creates serious liability. If a gas leak or fire occurs and the work was not done by a TSSA certified technician, your insurance may not cover the damage. Brandon is fully certified and carries the documentation to prove it.
What's Included
- Site visit and written quote
- Gas line sizing calculation
- Supply and installation of gas piping
- Meter connection coordination
- Branch lines to appliance locations
- Pressure test and leak check
- Appliance connection and commissioning
- 5-year labour warranty
- TSSA certification documentation
How a Job Goes
- 1
Site Assessment
Brandon visits your home in Trenton, Quinte West, Belleville, or Brighton to assess your existing gas system, meter capacity, and the routing options for the new line.
- 2
Written Quote
You receive a detailed written quote after the site visit. The quote covers materials, labour, and any meter or main line upgrades identified during the assessment.
- 3
Installation
Brandon installs the gas line, properly supports and protects the piping, and connects to the existing system. No subcontractors — Brandon does the work.
- 4
Pressure Test
The completed line is pressure-tested with a calibrated gauge. Brandon holds the line at test pressure and confirms there are no leaks before any appliance is connected.
- 5
Appliance Connection & Commissioning
Once the line passes the pressure test, Brandon connects the appliance, confirms proper operation, and walks you through the installation.
Service Area
Johnston Mechanical serves Trenton, Quinte West, Belleville, Brighton, Frankford, Stirling, and Campbellford for gas line installation. We also serve surrounding communities in Hastings County and Prince Edward County. Call (613) 827-8973 to discuss your project and confirm availability.
Warranty
All gas line installations by Johnston Mechanical include a 5-year labour warranty. Brandon stands behind his work — every installation is pressure-tested and documented before the job is considered complete.
Frequently Asked Questions
Do I need a TSSA certified technician to install a gas line in Ontario?
Yes. In Ontario, all gas line installation and modification work must be performed by a TSSA certified gas technician. This applies to new lines, extensions, and appliance connections. Brandon holds TSSA certification FS-R-52252 and provides documentation with every job.
Can you run a gas line to my outdoor BBQ or deck in Trenton?
Yes. Running a dedicated gas line to an outdoor BBQ or kitchen is one of the most common gas line jobs Johnston Mechanical handles in Trenton and Quinte West. Brandon will assess the routing from your meter or main line, size the line for your BBQ demand, and install a proper shutoff valve at the connection point.
How do I know if my existing gas line can handle a new appliance?
Brandon checks your meter capacity and main line size during the site visit and calculates whether the existing system can handle the additional BTU load. If an upgrade is needed, it will be included in the written quote before any work begins. You will never discover a capacity problem after the fact.
Get a Written Quote — No Obligation
Pricing is provided after a site visit. No made-up numbers over the phone — just an honest assessment from a TSSA certified technician.